Pulnix TS-9720EN Series Installationshandbuch PDF herunterladen (Seite 49)

Page 37

VIS CAM 300/400 Installation Manual

System Set-Up

FIGURE 32. Roll Bar Display example.

Pan the camera mount until the plate stand is centered under the default position of the vertical line in

the middle of the “Roll Bar” display. Securely tighten the pan bolt. Be careful not to change the pan of

the camera while you tighten the bolt. Oppositely twisting two 9/16" closed-end wrenches is

recommended (one for the bolt head and one for the nut) to help prevent the pan from moving while you

tighten the bolt.

Switch back to the “Tilt Line” display. Tilt the camera mount until the plate is positioned just above the

tilt line. Re-adjust the zoom as necessary until the plate just fits in between the zoom markers on the

“Tilt Line”. Changing zoom usually requires that the tilt adjustment be modified also. Do not tighten

the Tilt bolts until after the final lens adjustment. See Figure 33.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 115 116

Keine Kommentare

Pulnix TS-9720EN Series Installationshandbuch Seite 49