Pulnix TM-7200 Bedienerhandbuch PDF herunterladen (Seite 13)

INSTALLATION

TM-7200/TM-6200 High Resolution Digital CCD Camera Page 5

2.2.2 (b) 31-Pin Connector

The TM-7200/TM-6200 has a 31-pin connector for digital output.

2.2.3 Power Supply and Power Cable Setup

2.2.3 (a) Power Supplies

PULNiX recommends the following power supplies:

K25-12 110V AC/12V DC 2.1A power supply

P-15-12 220V AC/12V DC 2.1A power supply

K50-12 110V AC/12V DC 4.2A power supply

PD-12P 110V AC/12V DC 0.5A power supply

For users providing power through the 12-pin connector, the PD-12P power supply is available with the

12-pin mating connector already attached to the leads from the power supply. The PD-12 power supply

can be connected to the PULNiX power cable via a terminal strip or directly.

When wiring the PD-12 power supply directly, please note the following:

•

Twist the lead ends together and tin solder for strength and electrical continuity.

•

Use shrink tubing or a similar insulator to prevent exposed leads from touching.

•

The +12V lead is marked with a red stripe or white lettering; be sure not to reverse the leads.

•

Properly insulate all connections to prevent shorting.

Pin# Description I/O Pin# Description I/O

1 CLK+ O 17 CLK- O

2 LDV+ O 18 LDV- O

3 FDV+ O 19 FDV- O

4 GND 20 VINIT I

5 FI+ O 21 FI- O

6 INTEG I 22 ENINT I

7 LPULSE O 23 GND

8 D0+ O 24 D0- O

9 D1+ O 25 D1- O

10 D2+ O 26 D2- O

11 D3+ O 27 D3- O

12 D4+ O 28 D4- O

13 D5+ O 29 D5- O

14 D6+ O 30 D6- O

15 D7+ O 31 D7- O

16 GND

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Keine Kommentare

Pulnix TM-7200 Bedienerhandbuch Seite 13