Pulnix TMC-6700 Series Bedienerhandbuch PDF herunterladen (Seite 24)

Page 16

Operation

TMC-6700/1000 Series Progressive Scan CCD Digital Color Camera

3.2 Camera Rear Panel Switches and Connectors

The following two charts list and describe the features of the camera rear panel illustrated in Figure 7.

Table 5 on page 16 contains information on the switches on the rear panel and Table 6 on page 17

contains information on connectors on the rear panel.

TABLE 5. Camera Rear Panel Switches

# Switch Mode Description Action

1 Shutter dial 0 to 9 positions,

Manual (MAN)

Mode

Shutter speed

control dial for

manual shutter

mode

Please refer to Table 4 on page 15 for shutter

speeds.

0 to 9 positions.

Asynchronous

(ASY) Reset

Mode

Shutter speed

control dial for

asynchronous

shutter mode.

2 Shutter Mode

Switch

MAN Manual Shutter

Mode

Camera continuously outputs video at 15FPS.

ASY Asynchronous

Shutter Mode

Camera resets on Vinit signal: pin 6 of 12-pin

connector.

3 White Bal-

ance Reset

IWB RST

Held down White Balance

Reset switch

Calibrates the white balance so that the selected

object appears to be white.

Released Camera maintains the last white balance values

and holds the calibration internally.

4 White Bal-

ance Control

IWB Internal White

Balance

Selects Internal White Balance mode. In the

IWB mode, when the IWB reset RST button is

pushed, the camera internally adjusts R and B

white balance so that the white object is viewed

as white under particular light conditions.

EWB External White

Balance

Selects External White Balance mode. When

EWB mode is set, the external WB-R and WB-

B offsets are loaded from RAM. EWB preset

values can be changed via RS-232C only, i.e,

WB-R and WB-B offsets in RAM can be

updated by software.

5 Gamma Con-

trol Switch

G1.0 Gamma 1.0 Selects Gamma 1.0

G0.45 Gamma 0.45 Selects Gamma 0.45

6 Bank Switch Bank1 Bank1 selection

switch

Selects Bank1 camera parameter set.

Bank2 Bank2 selection

switch

Selects Bank2 camera parameter set

NOTE: Bank3 and Bank4 can be selected via

RS-232C control.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Pulnix TMC-6700 Series Bedienerhandbuch Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Pulnix TMC-6700 Series