Pulnix TM-76 Bedienerhandbuch PDF herunterladen (Seite 15)

Page 9

Operation

TM-75/76 High-Resolution CCD Camera

3.1.2 Internal Shutter Speed Control

Note: In order to enable Reset-Restart sync pulse, F2 function selection must be ON. Normal

external VD is detected automatically when F2 is OFF. In this mode, if there is no external

VD, internal VD is automatically generated.

3.1.3 Field and Frame Modes

The standard factory setting for the TM-75/76 camera is FRAME MODE. The ﬁeld and frame

integration mode is selectable using the #2 switch of the mode switch inside the camera. The frame

integration is used to separate all CCD pixels. The exposure of Odd and Even ﬁelds generates the full

frame image shown in Figure 3, “Field/Frame Diagram,” on page 10.

TABLE 2. Shutter Speed Control and Function

Mode SW Rotary SW Shutter Speed Trigger

F1 NO. Second H lines

OFF 0 No shutter

OFF 1 1/60 261.5

OFF 2 1/100 157.5

OFF 3 1/120 130.5

OFF 4 1/250 62.5

OFF 5 1/500 31.5

OFF 6 1/1,000 15.5

OFF 7 1/1,500 10.5

OFF 8 1/2,000 7.5

OFF 9 1/2,800 5.5

OFF A 1/3,500 4.5

OFF B 1/4,500 3.5

OFF C 1/6,000 2.5

OFF D 1/10,000 1.5

OFF E 1/29,000 0.5

ON D

Snapshot

a. Snapshot mode is similar to Donpisha mode.

Variable >0 Positive

ON E RR Position Variable >0.5 Positive

ON F RR Width Variable >2.5 Positive

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Keine Kommentare

Pulnix TM-76 Bedienerhandbuch Seite 15