Pulnix TM-7EX Handbuch PDF herunterladen (Seite 11)

1 Installing the MVS-8100C

Cognex MVS-8100C Hardware Manual 11

4. Verify that a jumper covers pins 2 and 3 on connector J3 in the upper-left corner of

the MVS-8100C, as shown in Figure 2.

Figure 2. External power connector and jumper setting

5. Press the card into its slot until it is seated firmly, and replace the slot cover screw.

6. Locate the MVS-8100C’s external +12 V power connector at J2, as shown in

Figure 2. Connect the 12 V power cable adapter (P/N 300-0175) to your PC’s power

supply and to the connector at J2. This cable provides additional power when

multiple cameras are used. Both connectors are keyed, and can only be inserted

one way.

Caution Before you attach cameras, be sure the PC’s power is OFF.

Attaching live equipment to the MVS-8100C can result in electrical

damage.

External

power

connector

To PC’s power supply

123

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Keine Kommentare

Pulnix TM-7EX Handbuch Seite 11