Pulnix TM-200 Bedienerhandbuch PDF herunterladen (Seite 13)

INSTALLATION

TM-200 / TM-300 Miniature CCD Camera Page 5

2.2 Camera Setup

2.2.1 Connector Pin Con gurations

2.2.1 (a) 12-Pin Connector

The TM-200 has a 12-pin connector for power input. Generally, Pin #1 is

Ground and Pin #2 is +12V DC. The other pins handle a number of other input

and output functions, which will be discussed further in other sections.

2.2.2 Power Supply and Power Cable Setup

2.2.2 (a) Power Supplies

PULNiX recommends the following power supplies:

K25-12 110V AC/12V DC 2.1A power supply

P-15-12 220V AC/12V DC 2.1A power supply

K50-12 110V AC/12V DC 4.2A power supply

PD-12P 110V AC/12V DC 0.5A power supply

For users providing power through the 12-pin connector, the PD-12P power supply is available with the

12-pin mating connector already attached to the leads from the power supply. The PD-12 power supply

can be connected to the PULNiX power cable via a terminal strip or directly.

When wiring the PD-12 power supply directly, please note the following:

•

Twist the lead ends together and tin solder for strength and electrical continuity.

•

Use shrink tubing or a similar insulator to prevent exposed leads from touching.

•

The +12V lead is marked with a red stripe or white lettering; be sure not to reverse the leads.

•

Properly insulate all connections to prevent shorting.

2.2.2 (b) PULNiX Power Cables

If you are using PULNiX power cables, such as the 12P-02, KC-10, etc., please refer to the pin-out

diagram. The color coded leads use Grey for Ground and Yellow for +12V DC.

Pin Description Pin Description

1 GND 7 VD Input

2 +12V DC 8 GND

3 GND 9 HD Input

4 Video Out 10 N/C

5 GND 11 Integration

6 N/C 12 N/C



1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Keine Kommentare

Pulnix TM-200 Bedienerhandbuch Seite 13